FieldBench
Board cross-reference
HoneywellSingle-stage warm air only

S9200U1000

Universal single-stage 120 V HSI IFC

Igniter

120 VAC hot surface. Resideo sheet: 17/27 or 30/30 s warmup. Not spark IP, not 80 V nitride-only.

Motor

Standard induction-type (PSC) circulator, 14.5 FLA. Not a 9-speed tap driver. Not serial communicating VS.

Replace list

  • Resideo: over 195 single-stage HSI IFCs. kit list includes Goodman/Amana B18099-06, B18099-08, B18099-10, B18099-13, B18099-13S, 1809913, 102077-01, 102077-02, 102077-03, 102077-04, 102077-06, 102077-09, 102077-10, 102077-14, 102077-19.
  • White-Rodgers 50A50 / 50A55 family including 50A55-843, 50A55-143, 50A55-286, 50A55-288, 50A55-438, 50A55-571, 50T35-730, 50T35-743.
  • ICM280. United Technologies 1012-933D. Texas Instruments 41F / 61F3.
  • York / Coleman 031-00662, 031-01140, 031-01234, 031-01235, 031-01933 and G951ADB cousins. Trane older CNT03740, CNT1309, D330930P01, D340790P01 class — not current S-series.
  • ICP 1010806, 1380686 class. Nordyne 624591, 903106 class.

Will not replace

  • Two-stage gas, dual pressure switches, 9-speed tap ECM (PCBBF132 / AR9T96 / GR9S96).
  • PCBBF110/112/123 / PCBBF136/140 — not on the S9200U sheet. Those stay ICM2811 / ICM2810.
  • Carrier HK42FZ004–017 — not on the published S9200U list. Use ICM282B / ICM2807 / 50M56U.
  • ComfortBridge, Infinity, Evolution, iComfort, ComfortLink, EcoNet, Daikin One.
  • Current Trane S9V2 / S9X2 / S8X2, Lennox 107045 SureLight, separate IP or HSI modules (that is S8610U / S8910U).

Field notes

  • This is the Honeywell/Resideo truck IFC — same job class as 50A55-843 / 50M56U-843, with keyed harnesses in the carton.
  • Circulator is called out as a standard induction-type fan. Do not hang it on a 9-speed tap or serial VS motor.
  • EnviraCOM on this board is legacy twinning / QuickLook — not ComfortBridge or Infinity.
  • Use the Table 1 cross in the S9200U install sheet. If the silk is not on that table, walk away.

Plates that name this carton

  • Read the silk

    Older Amana single-stage. If the silk is PCBBF110/112/123 or B18099-26, ICM2811 is the carton.

    Silk: PCBBF110 · PCBBF112 · PCBBF123 · B18099-26 · 0130F00005 · B18099-13

    White-Rodgers

    • 50M56U-843

      If the dead board is already a 50A55/50A65/50M56 single-stage HSI, the WR/ICM2812 kit is the universal path.

    ICM

    • ICM2811

      ICM for PCBBF110/112/123, 0130F00005, B18099-26 and WR 50A55-743 / 50A55-289.

    • ICM280

      Only if the silk is B18099-06 / 08 / 10 / 13 — older than the 26 / PCBBF110 generation.

    Honeywell

    • S9200U1000

      Resideo S9200U1000 lists Goodman/Amana B18099-06/08/10/13 and 102077-xx. Not PCBBF110/123 and not a 9-speed tap.

    • AR9S96 0140F20003-B thinking — that is a 9-speed E0–E7 card, not this LED flash plate.
    • ComfortBridge boards.
    AM9S96 chart
  • Read the silk

    Older Goodman single-stage LED. Silk decides: 110/123 → ICM2811. B18099-13 → ICM280. 50A55 only if it is already a WR 50A5x.

    Silk: PCBBF110 · PCBBF112 · PCBBF123 · B18099-26 · 0130F00005 · B18099-13

    White-Rodgers

    • 50A55-843

      If the silk is already a 50A50 / 50A55 carbide module.

    • 50M56U-843

      Harness kit when the dead board is on the 50M56U single-stage HSI list.

    ICM

    • ICM2811

      PCBBF110 / 112 / 123 / 0130F00005 / B18099-26 — ICM.

    • ICM280

      B18099-06 / 08 / 10 / 13 only.

    Honeywell

    • S9200U1000

      S9200U1000 list includes B18099-06/08/10/13, 102077-xx, ICM280, and 50A55-843. Not PCBBF110/123.

    • GR9S96 EE 7-seg card. GMVC96 ComfortBridge. PCBBF132 two-stage 9-speed.
    GMSS96 chart
  • Read the silk

    Same older Goodman LED family as GMSS96. Silk → ICM2811 or ICM280. 50A55 only if it is already a WR 50A5x.

    Silk: PCBBF110 · PCBBF112 · PCBBF123 · B18099-26 · B18099-13

    White-Rodgers

    • 50M56U-843

      If the dead board is on the 50M56U single-stage HSI list.

    ICM

    Honeywell

    • S9200U1000

      S9200U1000 list includes B18099-xx, 102077-xx, and 50A55-843. Same single-stage PSC job as those silks.

    • GR9S96 9-speed EE card. ComfortBridge.
    GMSS92 chart
  • Read the silk

    Classic 80% Goodman LED. This is the plate where 50A55-843 / ICM2811 actually show up — if the silk matches.

    Silk: PCBBF110 · PCBBF112 · PCBBF123 · B18099-26 · B18099-13 · 50A55

    White-Rodgers

    • 50A55-843

      If the silk is already a 50A50 / 50A55 carbide module — the usual 80% PSC universal.

    • 50M56U-843

      Harness kit when you are crossing a listed single-stage HSI and may need the HotRod igniter.

    • 50M56X-843

      If the blower is PSC or ECMx (not a 9-speed tap) and the cross is on the 50M56X list.

    ICM

    Honeywell

    • S9200U1000

      S9200U1000 lists B18099-06/08/10/13, 102077-xx, ICM280, and 50A55-843. Classic 80% PSC job — not AR9S80 9-speed.

    • AR9S80 9-speed 0140F20001-B card — different motor.
    • A 96% condensing board. ComfortBridge.
    GMS80 chart
  • Read the silk

    This is the Bryant plate where ICM282B / 50M56U actually apply — if the silk is HK42FZ004–016/034.

    Silk: HK42FZ004 · HK42FZ007 · HK42FZ008 · HK42FZ009 · HK42FZ011 · HK42FZ013 · HK42FZ016 · HK42FZ034

    White-Rodgers

    • 50M56U-843

      WR kit lists HK42FZ004/007/008/009/011/016 — not 013, not an 11-pin bar.

    ICM

    • ICM282B

      ICM for HK42FZ004/007/008/009/011/013/016/034. 013 is on this list (not on 50M56U).

    • ICM2812

      ICM2812 / 2812-KIT is the 50M56U-843 twin when you want the ICM carton.

    Honeywell

    • S9200U1000

      Only if the silk is already a 50A50 / 50A55 (S9200U lists 50A55-843). Not an HK42FZ drop-in.

    • HK42FZ017 two-stage (ICM2807) unless that is the silk.
    • Evolution 987M / 986T. 926T VS two-stage.
    • 50A55-843 onto a VS motor if this cabinet was upgraded — read the motor plug.
    916S chart
  • Read the silk

    Classic 80% Bryant. ICM282B or 50M56U when the silk is HK42FZ004–016/034.

    Silk: HK42FZ004 · HK42FZ007 · HK42FZ008 · HK42FZ009 · HK42FZ011 · HK42FZ013 · HK42FZ016 · HK42FZ034

    White-Rodgers

    • 50M56U-843

      HK42FZ004/007/008/009/011/016 — not 013.

    • 50A55-843

      If the silk is already a 50A50 / 50A55 carbide module.

    ICM

    • ICM282B

      HK42FZ004–016/034 including 013.

    Honeywell

    • S9200U1000

      Only if the silk is already a 50A50 / 50A55 (S9200U lists 50A55-843). Not an HK42FZ drop-in.

    • 880TA Evolution two-stage. 926T VS. A 96% condensing board.
    800S chart
  • Read the silk

    Comfort single-stage. ICM282B / 50M56U when the silk is HK42FZ004–016/034. Older CES011 → ICM281.

    Silk: HK42FZ004 · HK42FZ007 · HK42FZ008 · HK42FZ009 · HK42FZ011 · HK42FZ013 · HK42FZ016 · HK42FZ034 · CES0110057

    White-Rodgers

    • 50M56U-843

      HK42FZ004/007/008/009/011/016 — not 013.

    ICM

    • ICM282B

      HK42FZ004–016/034 including 013.

    • ICM281

      CES0110020 / 0048 / 0057-xx only — older 80+/90+ card.

    Honeywell

    • S9200U1000

      Only if the silk is already a 50A50 / 50A55 (S9200U lists 50A55-843). Not an HK42FZ drop-in.

    • 59TP6 VS two-stage IFC. Infinity 59MN7 / 59TN6. 50A55 onto a VS upgrade motor.
    59SC5 chart
  • Read the silk

    Classic Comfort 80. ICM282B or 50M56U on HK42FZ004–016/034. Very old CES011 → ICM281.

    Silk: HK42FZ004 · HK42FZ007 · HK42FZ008 · HK42FZ009 · HK42FZ011 · HK42FZ013 · HK42FZ016 · HK42FZ034 · CES0110020

    White-Rodgers

    • 50M56U-843

      HK42FZ004/007/008/009/011/016 — not 013.

    • 50A55-843

      If the silk is already a 50A50 / 50A55.

    ICM

    • ICM282B

      HK42FZ004–016/034 including 013.

    • ICM281

      CES0110020 / 0048 / 0057 only.

    Honeywell

    • S9200U1000

      Only if the silk is already a 50A50 / 50A55. S9200U does not list HK42FZ — that stays ICM282B.

    • 58CVA Infinity two-stage. 59SC5 96% board without checking vent and silk.
    58STA chart
  • No universal

    Two-stage VS. 50M56U / 50A55 / S9200U are single-stage PSC — they do not belong on this blower.

    Silk: 50A55 · 50A65 · 21D64-2 · 031-00662 · 031-01140

    White-Rodgers

    —

    ICM

    —

    Honeywell

    • S9200U1000

      S9200U lists older York 031-00662 / 031-01140 / 031-01234 and 50A55-843. Current TM9V is two-stage VS — only if this cabinet is actually that older single-stage IFC.

    • 50A55-843 / 50M56U-843 / 50M56X-843.
    • ICM2813 SureLight (Lennox). TM9T multi-speed board assumed without reading silk.
    TM9V chart
  • No universal

    80% VS. Not a 50A55 / S9200U 80% PSC drop-in.

    Silk: 50A55 · 031-00662 · 031-01140

    White-Rodgers

    —

    ICM

    —

    Honeywell

    • S9200U1000

      S9200U lists older York 031-00662 / 031-01140 / 031-01234 and 50A55-843. Current TM8V is VS — only if this cabinet is actually that older single-stage IFC.

    • 50A55-843 / S9200U1000 ‘because 80% and York’. TM9V 96% board.
    TM8V chart
  • Read the silk

    Carrier-platform Comfort 96. Same HK42FZ / CES rule as 59SC5. ICM282B or 50M56U when the silk matches.

    Silk: HK42FZ004 · HK42FZ007 · HK42FZ008 · HK42FZ009 · HK42FZ011 · HK42FZ013 · HK42FZ016 · HK42FZ034 · CES0110057 · 1010806 · 1380686

    White-Rodgers

    • 50M56U-843

      HK42FZ004/007/008/009/011/016 — not 013.

    ICM

    • ICM282B

      HK42FZ004–016/034 including 013.

    • ICM281

      CES0110020 / 0048 / 0057-xx only.

    Honeywell

    • S9200U1000

      Resideo lists ICP 1010806 / 1380686 and 50A55-843. Not an HK42FZ drop-in — photograph the silk.

    • Infinity boards. 59TP6 VS two-stage. 50A55 onto a motor this board did not ship with.
    N9MSB chart
  • Read the silk

    Bulletin-era 90%. 50A55 / S9200U / 50M56U only if the silk is already that WR family — not because the cabinet says 58MCA.

    Silk: 58MCA · 50A50 · 50A55

    White-Rodgers

    • 50A55-843

      Only if the dead board is already a 50A50 / 50A55 carbide module.

    • 50M56U-843

      Harness kit when the silk is on the 50M56U single-stage HSI list.

    ICM

    —

    Honeywell

    • S9200U1000

      S9200U lists 50A55-843 and older Carrier 50A5x cousins. Not a current 59-series IFC.

    • A 59TP6 / 59MN7 IFC. Wrong generation.
    • Filing SMB 09-0024 on a current 59-series serial.
    58MCA chart
  • Read the silk

    Older Trane 80%. 50A55 / S9200U only if the silk is already that module.

    Silk: 50A55

    White-Rodgers

    • 50A55-843

      Only if silk is already a 50A50 / 50A55.

    ICM

    —

    Honeywell

    • S9200U1000

      S9200U lists older Trane CNT / 50A55 cousins — not current S-series.

    • S8X2 current card. ComfortLink XC95m board.
    XC80 chart
  • Read the silk

    Classic 80% Rheem. 50A55 / S9200U only if the silk is already that module.

    Silk: 50A55 · 62-24084-82

    White-Rodgers

    • 50A55-843

      If the silk is already a 50A50 / 50A55.

    ICM

    Honeywell

    • S9200U1000

      If the silk is already a 50A55 (S9200U lists 50A55-843).

    • R801V VS EcoNet board. A 96% Rheem IFC.
    R801S chart