Rheem
H
StatusHeating
Status — a heat call is running.
Walk H in Diagnose
2 plates — walk the one on the cabinet
First check
1 Confirm this is not a fault
On the Rheem R951T this readout (H) is run status, not a lockout. Write what the display actually shows and whether W/Y/G is present at the IFC.
Expect: Idle / Ht / CF / stage+CFM words change when you apply and remove the call.
If fail: If the word never changes on a real call, the call is not reaching this IFC.
If pass: The board is alive. Diagnose the comfort complaint, not this code.
The rest of the walkthrough is Diagnose.
On the plates
- Not a fault. If comfort is poor, watch for 45/57/22 while it runs.