FieldBench
Trane codes

Trane

ODF

Protect

Outdoor fan fail

Fan not turning. Compressor may still run and then HPS.

Walk ODF in Diagnose

2 plates — walk the one on the cabinet

First check

1 Heat rejection first

On Trane XR16 high pressure is outdoor airflow until proven otherwise. Fan running the right direction, coil clean, fins not folded, no recirc over a fence or through a garage. Dual-cap FAN section µF vs sticker. A good HERM and a dead FAN is the usual Comfort call.

Expect: OD fan on, coil clean, discharge air leaving the top/side freely.

The rest of the walkthrough is Diagnose.

On the plates

  • Dual-cap FAN section µF vs sticker. A good HERM and a dead FAN is the usual Comfort call.
  • Fan motor ohms / ground, blade clearance, capacitor wiring (C / FAN / HERM).
  • Not an inverter fan module — there isn’t one.

Plates that use ODF

Same number, other makers

ODF on Trane is not the same code on these plates.